|
|
|
|
|
Wet Chemical Analysis / Testing
|
|
Description
To cater the needs of the metal industry where the range of metals and it's alloys has no limits, We offer our chemical testing facilities for testing wide range of metals and its alloys which includes identification and estimation of different elements. MS provides accurate & precise results based on methods traceable to National and International standard test procedures.
Test Facilities
| Instruments |
No. |
Make |
Optical Emission Spectrometer ARL 3460
for Fe/ Cu / AI / Ni Base Alloys Analysis
|
2 |
Swiss |
| ICP AES IRIS / iCAP Termo |
2 |
UK |
| Hydrogen Determinator LECO RH 402 |
1 |
USA |
| EDS XRF Spectrometer Thermo |
1 |
USA |
| Oxygen Nitrogen Determinator LECO TC 136 |
1 |
USA |
| Carbon Sulfur Determinator LECO CS 300 |
1 |
USA |
| Mettler Balance (Digital) |
2 |
Swiss |
| Anamed Balance (Digital) |
1 |
Indian |
| Stroleins Appatatus for Carbon & Sulfur |
1 |
Indian |
| Electro Analyser |
3 |
Indian |
| Digital(visible range) Spectrophotometer |
1 |
Indian |
| Digital pH Meter |
1 |
Indian |
| Conductivity Meter |
1 |
Indian |
| PMI Niton |
3 |
USA |
Charges
| Wet Chemical Test / Analysis |
Rate per Specimen (Rs)
Rates from 1st April 2008 |
|
Ferrous Material
Single Element
(Except Nitrogen, Boron)
2 to 4 Elements
5 - 9 Elements
10 and above
Unknown sample to confirm the grade
|
125/-
70/-
60/-
55/-
600/-
|
Non Ferrous Material
Single Element
2 to 4 Elements
Above 4 Elements
Unknown sample to confirm the grade
Chemical sample preperation fr overlay / weld |
150/-
80/-
70/-
700/-
60/- |
| Nitrogen, Boron - Each By OES |
200/- |
Ferro Alloys
Main Element
Each Additional Element
Fusion Charges Extra where applicable |
250/-
125/-
300/- |
Analysis on ICP at ppm/ppb level/Metallic Elements in water
Full scanning by ICP, upto 12 Elements |
300/-
3000/-
|
a) Purity of Al, Cu, Cd, Zn, Mg, Ni, Co, Pb, Sn, Sb, Ag
b) Purity of Titanium
c) lncoloy/Inconel/Hastelloy/Stellite Samples |
600/-
800/-
700/- |
Oxygen in Metal - Metal Alloys by LECO
Nitrogen in Metal - Metal Alloys by LECO
Hydrogen in Metal - Metal Alloys by LECO |
1000/-
500/-
1500/- |
| Moisture Content |
500/- |
| Density |
150/- |
|
|
| |
|
|
© Metallurgical Services 2010
|
