|
|
|
|
|
Miscellaneous Tests
|
|
Charges
| Miscellaneous Test |
Rate per Specimen (Rs)
Rates from 1st April 2008 |
| Mercurous Nitrate Test |
250/-
|
| Mass of Zinc Coating (Stripping Test) |
175/- |
| Uniformity of Zinc Coating (Preece Test) |
175/- |
| Residual Chloride Salt Contamination Test |
200/- |
| Persulphate Test on Tinned Wire |
200/- |
| Carbon Film Test |
200/- |
| Ferrite Content Test per point |
225/- |
| Cupping Test |
120/-
|
| Weld Decay Test |
1000/- |
| Thermal Shock Test |
300/- |
| Fracture Test on Fillet |
150/- |
| Pull Out Test on Mockup |
150/- |
| Tear Test on Mockup |
150/- |
| Minimum Leak Path Test (Wedge Test) |
150/- |
Stress Relieving (up to 8 hours cycle)
additional per hour |
3000/-
300/- |
Normalizing (up to 8 hour cycle)
additional per hour |
4000/-
400/- |
| Welder Qualification Test |
Charges on request |
| Electrode Qualification Test |
Charges on request |
| Step Cooling |
Charges on request |
| Electron Microscopy (SEM / TEM) |
Charges on request |
| Stress Rupture Test |
Charges on request |
| Hydrogen Disbonding Test |
Charges on request |
| Sustained Load Cracking (SLC) Test |
Charges on request |
| On Site Services |
|
| Radiography (Gamma Rays) |
Charges on request |
| Ultrasonic Inspection |
Charges on request |
| Dye Penetration Test |
Charges on request |
| Positive Metal Identification (PMI) |
Charges on request |
| Ferrite Test on site |
Charges on request |
| Hardness Test on site |
Charges on request |
|
| |
|
| |
|
|
© Metallurgical Services 2008
|
